EasyManua.ls Logo

Hamilton Beach 2202 - To Remove Mineral Deposits; Preparing for Vacation; Trouble Shooting

Hamilton Beach 2202
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To Remove Mineral Deposits:
Mix 2 quarts (2 liters) of water with two quarts of vinegar OR mix 1 gallon of water (4 liters) with
16 ounces (454 g) of citric acid crystals. Bleach does not remove mineral deposits. Do this in
place of step 6 above when removing mineral deposits.
Preparing for Vacation
:
For long vacations or absences, set both power switches (on back of the dispenser) to the OFF
position.
Unplug the water dispenser.
Remove the water bottle.
Drain the water tanks (see Draining Instructions)
Dry the separator thoroughly on both the top and bottom (see Cleaning the Separator).
After returning from vacation, make sure to sanitize the water tanks before using the dispenser (see
Sanitizing and Cleaning the Water Tank).
TROUBLE SHOOTING_____________________________________________
PROBLEM POSSIBLE CAUSES SOLUTION
No hot or cold water 1. over consumption of hot or 1. wait 30 minutes
cold water in short period before using again
of time
2. no power supply 2. connect plug to socket,
turn on heating or
cooling switch.
Water is not cool Dispenser is unplugged Push plug completely into
outlet
Cooling switch not on Check to be sure cooling
switch is turned to ON
The fuse is blown/circuit Replace house fuse or reset
breaker is tripped circuit breaker.
If too many items are
plugged into a single
circuit, move some items
to a different circuit
12

Related product manuals