12
How to Steam and Froth Milk
1
3 42
Plug in unit; press ON/OFF button
to begin heating water. The ready
light will glow green when the
water is heated and unit is ready
for use.
Fill a metal or ceramic cup 1/3
full with cold milk. A stainless
steel cup and skim milk are
recommended.
Hold cup underneath frothing
nozzle, leaving about 1/4 to
1/2 inch (0.6 to 1.3 cm) between
the nozzle and the bottom of
the cup.
Ensure there is water in the
removable water reservoir and
move the frothing nozzle to the
right of the unit.
w WARNING
Burn Hazard. Vapor and
water emitted from frothing nozzle are hot.
To Next Page
Loading...
