Hamilton Beach 64693 - How to Use Your Stand Mixer; Stand Mixer Setup and Base Attachment; Stand Mixer Attachment Insertion; Stand Mixer Operation and Speed Control

5
How to Use Your Stand Mixer
2
4
Following diagrams on bottom
of mixer, insert desired attach-
ment(s) into proper openings on
bottom of mixer. Push and click
into place.
5
1
Always make sure mixer is
unplugged and speed control is
set to OFF ( ).
3
Plug in mixer.
6
When finished, turn speed control
to OFF ( ). Then unplug.
To eject attachments, push
straight down on the speed con-
trol.
Gently press the back of the
mixer onto the platform until it
locks into position.
7 8
With platform level, place the
L-shaped tab on platform into
slot on bottom of mixer.
Move speed control to desired
speed. Start at 1 and increase
speed as needed.