EasyManuals Logo

Hamilton Beach Digital Simplicity User Manual

Hamilton Beach Digital Simplicity
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
How to Set Heat/Simmer
2
1
Press SELECT MODE until Heat/
Simmer is illuminated. “5” will
appear in the display. (5 minutes
is the minimum amount of time.)
NOTE: The simmer time can
be set for up to 5 hours. Set
Heat/Simmer time in 1-minute
increments up to 90. After 90
minutes, set in 1-hour increments
up to 5.
3
Place water and desired contents
into cooking pot.
Press COOK TIME until desired
amount of “simmer” time is
selected. Press START
(I)
or the
rice cooker will automatically start
after 5 seconds. The cooker
will heat the contents and then
simmer for the selected amount
of time.
Display will show “ON” during
heating and will count down set
time once simmering has begun.
After simmer time is complete,
the cooker will automatically
switch to Keep Warm.
NOTE: The rice cooker starts
heating liquids immediately. The
start of actual simmering depends
on the amounts of liquid and food
placed in the rice cooker.
WARNING! Burn Hazard: Never
use lid handle to carry cooker
when contents are hot. Steam
from steam vent can cause injury.
4
w WARNING
Electrical Shock Hazard. Cook only in
removable cooking pot and steamer basket. Never place
water or food directly into the base.
BEFORE FIRST USE: Wash cooking pot following
Cleaning instructions; dry thoroughly.
840245300 ENv05.indd 9840245300 ENv05.indd 9 5/21/14 12:44 PM5/21/14 12:44 PM

Other manuals for Hamilton Beach Digital Simplicity

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hamilton Beach Digital Simplicity and is the answer not in the manual?

Hamilton Beach Digital Simplicity Specifications

General IconGeneral
BrandHamilton Beach
ModelDigital Simplicity
CategoryRice Cooker
LanguageEnglish

Related product manuals