11
3
5
Programming – For Carafe Side Only
21 4
Press HOUR and then MINUTE to
set clock.
Rotate dial to the left to select
carafe ( ).
Continue holding PROGRAM
button, press HOUR and MINUTE
until the desired brewing start
time is reached, and then release
PROGRAM button.
Hold PROGRAM until clock flashes.
Press PROGRAM to activate
automatic brewing. Green
program light will illuminate to
indicate the unit is programmed
and will begin brewing at the
selected start time.
NOTE: The unit will only brew on one side at a time. Single-Serve side cannot be used while Carafe side is programmed.
840219701 ENv04.indd 11 1/29/14 4:51 PM
To Next Page
Loading...
