6
How to Brew a Single-Serve Pack (cont.)
7
8
Use the lower cup position for a
larger cup, such as a travel mug.
9
w WARNING
Burn Hazard.
If brew process is stopped early, the water must be drained from the unit. Place a large mug on cup rest.
Press the I/O (ON/OFF) button to remove any remaining water. Failure to remove the water can cause the
next cup brewed to overflow.
NOTES:
• Coffeemaker brews all the water added.
• Press the I/O (ON/OFF) button again to STOP brewing midcycle.
• Press I/O (ON/OFF) button to remove any remaining water from the water reservoir.
• If there is a small amount of water remaining in the water reservoir, add at least 8 oz. (237 ml) cold
water before pressing the I/O (ON/OFF) button.
Press
button to select regular or bold strength coffee.
Press I/O (ON/OFF) button to brew your coffee. The coffeemaker will
shut off automatically when brewing is complete.
10
Funnel and single-serve pack
holder should be rinsed after
every use.
840239700 ENv20.indd 6 10/22/14 4:51 PM
To Next Page
Loading...
