5
How to Brew a Single-Serve Pack
w WARNING
Burn Hazard.
To avoid contact with hot coffee
or water:
• Do not fill water above 10-oz.
(296 ml) fill line
.
• Fill reservoir with cup or travel
mug of water into which the
coffee will be brewed.
• Place cup or travel mug on
cup rest.
• Do not lift lid during the
brewing process.
1 2 3
Place a pack into the single-serve
pack holder. Do not remove foil.
65
Fill reservoir with cup or travel
mug into which the coffee will
be brewed. 10 oz. (296 ml) of
water is the MAX amount for
single-serve packs.
w CAUTION
Cut Hazard.
Use caution when handling:
• Removable single-serve pack
holder has a sharp blade.
• Piercing needle on the
underside of the lid is sharp.
4
To open lid, press button and lift.
Lower lid until you hear a click sound. This means your lid is locked
in place. To adjust cup rest: Tilt the front of the cup rest up to insert
tabs into openings for the upper cup rest position. To return cup rest
to lower position: Tilt the front of the cup rest up; move tabs down
and out. Lower cup rest into position so tab on right-rear corner is in
the slot.
NOTES:
• Use only cold water in reservoir.
• Do not use hot water.
• Do not reheat coffee in the
machine.
• Do not use creamer or nondairy
creamer in reservoir.
• After brewing hot cocoa single-
serve packs, brew a water-only
cycle without a single-serve
pack to avoid the possibility of
clogging the piercing needle.
• The brew basket may be left in
place when using the single-
serve pack holder.
Add funnel and insert the single-
serve pack holder into funnel.
840239700 ENv20.indd 5 10/22/14 4:51 PM
To Next Page
Loading...
