9
How to Set the Time for the First Time
32 4
Press and release
button.
1
“12” will flash.
Press
button to adjust by
1-hour increments.
To adjust hours faster, press
and hold
button. Release
button and wait 3 seconds for
the minutes to begin flashing,
indicating minutes can now
be set.
NOTE: If you press the I/O (ON/
OFF) button before setting the
clock, the clock display will
disappear for your convenience.
At any time, the clock can be set
by pressing the
button.
5
Minutes will flash for only 3
seconds and then stop flashing
if the
button is not pressed
or held within that time. Press
button to adjust by 1-minute
increments.
6
To adjust minutes faster, press
and hold
button. Release
button and wait 3 seconds for
the clock to stop flashing and the
time will be set.
840239700 ENv20.indd 9 10/22/14 4:52 PM
To Next Page
Loading...
