To Next PageTo Next Page
Need help?Do you have a question about the Hamilton Engineering EVO HW 599 Series and is the answer not in the manual?
General| Category | Water Heater |
|---|---|
| Series | EVO HW 599 Series |
| Type | Tankless |
| Gas Type | Natural Gas or Propane |
| Water Connection Size | 3/4" NPT |
| Voltage | 120V |
| Venting | Direct Vent |
| Maximum Water Temperature | 180°F |
| Activation Flow Rate | 0.5 GPM |
| BTU Input | 199, 000 BTU/hr |
Covers electrical connection standards, voltage, amperage, and grounding requirements for safe installation.
Details field wiring connections, sensor inputs, and control board connections for proper functionality.
Covers gas supply requirements, safety checks, leak testing, and approved gas types for installation.
Explains how to test gas pressure at different loads and ensure proper valve operation for optimal performance.
Lists approved materials and standards for vent pipes and fittings, including country-specific requirements.
Specifies vent diameters, types, minimum/maximum lengths, and equivalent feet for fittings.
Describes closed-loop system requirements, pressure, primary-secondary piping, and system components for boilers.
Details the step-by-step process for filling and purging the heating system to remove air and sediment.
Outlines pipe sizes, pump specifications, and connection methods for water heating systems.
Lists critical checks before lighting the EVO, including reading the manual and verifying connections.
Provides essential safety warnings and instructions for lighting the appliance, including gas leak procedures.
Lists soft lockout codes for the CCB and BCB, their causes, and recommended actions for resolution.
Lists hard lockout codes for the BCB, their causes, and recommended actions for resolution.
