Hamilton Khaki - Watch Adjustments and Functions; Adjustment of time T1; Adjustment of the date; Adjustment of time zone T2 on the dial

 © HAMILTON 2006 / KHAKI NAVY
Five basic rules for maintaining the
water-resistance of your watch
1. Have your watch checked regularly.
2. Do not move the crown when you are in water.
3. Rinse o your watch after having been in the sea.
4. Dry your watch whenever it gets wet.
5. Have your watch checked for water-resistance by
an authorized Hamilton agent each time the case
is opened.
Adjustment of time «T1»
1. Unscrew the crown (A).
2. Pull out the crown completely to position (p2).
The second hand stops.
3. Adjust the time by turning the crown in the
desired direction.
4. Push the crown completely back in and screw
it down again. The second hand starts again,
allowing precise synchronization with a time
signal.
Adjustment of the date
1. Unscrew the crown (A).
2. Pull out the crown to position (p1).
3. Turn the crown counterclockwise until the desired
date is displayed.
4. Push the crown completely back in and screw it
down again.
Adjustment of time zone «T2» on the
dial (according to model)
1. Unscrew the crown (A).
2. Pull out the crown to position (p1).
3. Turn the crown clockwise until the time «T2» is
facing the arrow.
4. Push the crown completely back in and screw it
down again.
Adjustment of time zone «T2» or «T3»
on the interior bezel (according to model)
1. Unscrew the crown (B).
2. Turn the crown until the interior bezel graduation
that represents the desired time dierence is
positioned at 12 o’clock on the dial.
Ex. +3 hours of time dierence:
Read the local time 3.30 and the time «T2» 6.30.
3. Screw the crown down again.