Need help?Do you have a question about the Hamilton Multi Touch Watch and is the answer not in the manual?
General| Brand | Hamilton |
|---|---|
| Category | Watch |
| Connectivity | Bluetooth |
| Water Resistance | 50 meters |
| Compatibility | iOS, Android |
| Battery Life | Up to 1 week |
For best temperature reading, remove watch and wait 15-30 minutes.
For correct altimeter use, adjust it as often as possible.
The barometer function indicates weather trends based on hand positions.
Watch is waterproof to 30 m, but functions are unavailable if glass contacts liquid.
Activate the touch-sensitive glass by pressing the 'H' button.
Select functions by touching the corresponding areas on the glass.
Brief presses for step-by-step, long presses for continuous movement/incrementation.
The glass automatically deactivates after 30 seconds of no operation.
The watch uses a Renata CR 1632 battery.
Activate the glass to begin the synchronisation procedure.
Use pushers to align hands precisely to 12 o'clock for sync.
Increment minute and hour hands in 3-step intervals for synchronisation.
Validate the setting to complete the synchronisation process.
Activate the glass to access display mode settings.
Choose between 'h-m-s', 'date', or 'units' display modes.
Return to the standard 'h-m-s' display mode after selecting others.
Activate the glass to enter time setting mode.
Choose the 'h-m-s' format for setting the time.
Increment or decrement minutes for accurate time setting.
Validate the setting to restart seconds at zero or continue normally.
Activate the glass to enter date setting mode.
Choose the 'date' format for setting the calendar.
Increment or decrement days for accurate date setting.
Validate the setting to confirm the date.
Activate the glass to access unit selection settings.
Choose between Celsius/metre, Fahrenheit/foot, and 12/24 hour formats.
Validate the chosen unit selections.
Activate the glass to access the barometer function.
Activate the barometer function to view meteorological tendencies.
Activate the glass to access the chronograph.
Start the chronograph measurement.
Stop the chronograph measurement.
Reset the chronograph to zero.
Activate the glass to use the split time function.
Start the chronograph measurement with split time capability.
Display intermediate times during a running chronograph.
Restart the chronograph, accounting for running time.
Activate the glass to access the compass.
Activate the compass function to indicate geographical North.
Adjust magnetic deviation for accurate geographical North indication.
Validate the magnetic deviation setting.
Activate the glass to access the alarm settings.
Activate the alarm function for a set time.
Deactivate the alarm function.
Set the desired alarm time.
Validate the alarm time setting.
Activate the glass to access the altimeter.
Activate the altimeter function to display altitude.
Adjust the altimeter setting to the current altitude.
Validate the altitude adjustment.
Activate the glass to access the thermometer.
Activate the thermometer function to display temperature.
Explains how the watch functions as a barometer.
Details how pressure changes affect weather indications.
Provides additional information on barometer operation and trends.
Lists technical specifications for the barometer function.
Explains how the watch indicates geographical North.
Details how the compass works with magnetic deviation.
Provides additional information on compass usage and limitations.
Lists technical specifications for the compass function.
Explains how the watch functions as a barometric altimeter.
Details how atmospheric pressure is used to calculate altitude.
Warns about altitude display sensitivity to weather-induced pressure changes.
Provides additional information on altimeter compensation and measurement.
Lists technical specifications for the altimeter function.
Explains how the watch displays ambient temperature.
Details how body temperature can affect displayed temperature readings.
Provides conversion formulae and unit selection for temperature.
Issue where display alternates between battery status and time.
Problem description: display goes out and hands stop.
Issue in meteo mode where 'hPa' shows without a value.
Observation that hands are not exactly over noon in meteo mode.
Issue where hands are not aligned when a function is selected.
Problem where indicated time by hands differs from digital display.
Issue where the compass does not indicate geographical North correctly.
Observation that adjusted altitude value differs from the previous day.
To Next Page