Hamilton Multi Touch Watch - Selecting Units; Activating Glass for Unit Selection; Selecting Unit Modes; Validating Unit Selections

98
1"
2"
Activation of the glass
Activation of the setting
Validation of selections
Selecting the "Units" mode
Selecting "Celsius degree / metre"
or "Fahrenheit degree / foot"
Selecting "12" or "24" hours
1"
(1) For more information, see the explanation of the barometer
function on page 16.
(2) The two hands indicate a tendency while the digital display
gives the absolute pressure in hectoPascal
(1 hectoPascal = 1 millibar).
After 30 seconds, the digital display returns to "h-m-s" mode.
(2)
Activation of the glass
Activation of the barometer function
S ELECTING THE UNITS B AROMETER
Indication of the meteorological tendencies
(1)
Manuel Ham_GB_2e manuel.qnx 1.10.2001 16:22 Page 8