Hamilton PSR - Setting the Time; Activating Time Setting Mode; Setting the Hour and AM;PM

1. Activating setting mode
Press and hold the push-button for 3 seconds to
enter time-setting mode.
Follow the numbered steps 1 to 8.
The time to be set will ash, and «A» or «P» will
be displayed on the right. This tells you that the
time is in the morning «AM», or afternoon «PM».
If no other action is taken, the display will return
to standard mode after 5 seconds.
Note: Once the display returns to standard
mode, the last change made will be saved. This
is valid for each setting step.
2. Hour setting (AM/PM)
Every press on the push-button increases the
value by one unit.
Example:
Press four times to change from 10 o’clock (AM)
to 2 o’clock (P
M).
1 0 A
AM
3’’
Standard display
Setting mode: display will ash
2 P
PM