Hamilton PULSOMATIC User Manual

4 © HAMILTON 2010 – INSTRUCTION MANUAL © HAMILTON 2010 – INSTRUCTION MANUAL 5
Operating instructions
Functions
Your Hamilton Pulsomatic watch has the following functions:
• Digital display
Hours, minutes ( h /  h)
Date (for  seconds)
24 h / 12 h display
. Pull the crown out to position (p), then immediately press the crown in to position (p) and pull it out again
to position (p): the display will indicate  H.
. Change the display ( H /  H) by turning the crown.
. Push the crown back in to position (p) to conrm the change.
Adjustment of hours and minutes
. Pull the crown out to position (p): the display will ash.
. Adjust the hour by turning the crown rapidly in the desired direction (–/+).
. Adjust the minutes by turning the crown slowly in the desired direction (–/+).
. Push the crown back in to position (p) to conrm the adjustments and synchronize the seconds.
Operating instructions
Display and adjustment of the date
. Turn the crown rapidly in position (p): the date will display for  seconds.
. Immediately pull the crown out to position (p): the display will ash and indicate the date and the month.
. Adjust the date by turning the crown slowly in the desired direction (–/+).
. Adjust the month by turning the crown rapidly in the desired direction (–/+).
. Push the crown back in to position (p) to conrm the adjustments.
Charging the accumulator
About  hours before the reserve of energy is completely used up, a triangular symbol will appear and ash to
indicate that it is time to recharge your watch before it stops functioning. It is possible to store your watch for
an extended period by pulling the crown out to position (p). After around  minutes, the watch will go into
standby and lose its settings. To restart, push the crown in to position (p) and turn it several times in a clockwise
direction.

Hamilton PULSOMATIC Specifications

General

Brand	Hamilton
Model	PULSOMATIC
Category	Watch
Language	English