3. Docking Station Installation
The Docking Station is automatically recognized by the operating
system once connected to the USB Type-C port of the computer
without the need to install any driver.
1. Connect the Docking Station to the computer using the
supplied USB Type-C cable.
2. Plug the power adapter into the power jack of the docking.
3. Connect the Docking Station to a DP and/or HDMI monitor.
The screen may go black or flicker during this process.
4. Connect the USB devices, Ethernet cable and speakers or
headphones to the corresponding connectors on the docking.
5. The Docking Station is now ready for use, press the power
button to turn it on.
To Next Page
Loading...
