Hamlet HDOCKS600C User Manual

Cursor disappeared
In extended mode operation, if the add-on display is disconnected,
the desktop will still be extended to the add-on monitor. In this case,
the cursor may not be visible on the main display.
If it happens, reconnect the add-on monitor and move the mouse
cursor on the primary monitor.
Video playback in extended mode
If the quality of video or DVD playback is poor or slow in extended
mode, please playback the video or DVD on the primary monitor
instead of the external monitor.
Mirror mode
1. Open the Screen Resolution configuration window.
2. In the Display drop-down menu, select the preferred monitor.
3. In the Multiple displays menu, select Duplicate these
displays.
4. Click OK to confirm and exit.
Set the Primary Monitor
1. Open the Screen Resolution configuration window.
2. In the Display drop-down menu, select the preferred monitor.
3. Check the box Make this my main display.
4. Click OK to confirm and exit.
SST mode
If the system only supports SST mode, the external monitors
connected will be considered to be the same output.
MST mode
When using MST mode to connect external monitors, you can use
Extend mode, Mirror mode or set the main display.

Hamlet HDOCKS600C Specifications

General

Brand	Hamlet
Model	HDOCKS600C
Category	Docking Station
Language	English