Hammarlund HX-50 - User Manual

THE
HX-500
TRAN MITTE
..
2 DESCRIPTION
- AND
-
The Hammarlund Manufacturing Co., Inc.
460 W •• t 34th Street, New York 1, N Y.
Interna lonal Dlvl.lon: 13 East 40th Street. New Vork 16, • Y.
FREE DOWNLOAD COURTESY OF N9SOR WWW.HAMMARLUND.ORG

Summary

Introduction to the HX-500 Transmitter

Location of Controls

Control Identification

Identifies and describes front panel controls for operation and tuning.

Installation and Connections

Power, Antenna, and Relay Connections

Covers power, antenna, receiver audio, and relay setup procedures.

Function of Operating Controls

Control Descriptions

Details the function of each operating control on the transmitter.

Tuning Procedures

General and Mode-Specific Tuning

Covers general tuning, CW, SSB, AM, FSK, FM, and VOX operations.

Circuit Description

Signal Path and Component Functions

Explains the signal flow and function of key circuits and stages.

System Components and Measurements

Output Meter, Power Supply, and Tube Complement

Details the output meter, power supply, and lists all tubes used.

Field Alignment Procedure

Alignment Prerequisites and Steps

Covers required equipment, instructions, and tuning steps.

Neutralization Procedure

Method to minimize parasitic oscillations in the final stage.

Comprehensive Test and Alignment

Main Chassis and VFO Alignment

Detailed procedures for main chassis and VFO alignment.

Parts Lists

Main Chassis and Exciter Components

Lists components for the main chassis and exciter assemblies.

Standard Warranty

Hammarlund HX-50 Specifications

General

Brand	Hammarlund
Model	HX-50
Category	Transmitter
Language	English