Hammerhead HASG043 - Belt Clip and Power Control

4.3 AMP DRYWALL SCREW GUN 11
OPERATING INSTRUCTIONS
3. Belt clip
You can hang the machine on your
belt using the belt clip . This enables
you to have the machine constantly
within your reach while both hands
remain free.
4. Switching on and off
a) Connect the plug to the power
point.
b) Start the tools by squeezing the
on/off trigger switch.
c) Release the trigger switch to stop
the tool.
d) If you press the lock-on button
while the trigger switch is
depressed, the switch is kept in
the operating position.
e) To release the lock-on button,
press and release the trigger
switch.
3
4
Trigger
switch
Lock-on
button