HammerSmith Paint Blast - Informations de Sécurité Importantes

8
9
immediately.
• Keep your hands and fingers away from the
sprayhead.
• Loose clothing and jewellery can increase the
risk of injury.
• Keep your feet well supported and balanced at
all times. Do not overreach.
• This device is not designed for use by persons
(including children) with impaired physical,
sensory or mental capacities, or with lack
experience or knowledge, unless they receive
adequate supervision or instruction in the use
of this device from a person responsible for
their safety.
• Keep out of the reach of children (minors must
be supervised to ensure that they do not use
this device as a toy).
• Keep your Hammersmith Paint Blast in good
condition; check if it is misaligned, if any
moving part is stuck, if any part is broken, or if
there is any other problem that might affect its
operation.
• Use Hammersmith Paint Blast, the accessories
and application tools according to the
instructions for use, taking into account the
conditions of the area that is going to be
painted and the work to be carried out.
• Only use components authorised by the
manufacturer. The user assumes all risks
and responsibilities when using parts that
do not meet the minimum specifications and
requirements of the manufacturer’s safety
devices.
• Never spray without the protection of the
nozzle.
• Keep the electric cable, plug and the trigger of
the spray gun free of paint and other liquids.
• Be careful when cleaning or adjusting the
nozzle; if the nozzle clogs up during spraying,
see the cleaning instructions included in this
manual.
• Make sure the switch is in the OFF position
before plugging in the power cord, lifting or
moving the paint sprayer.
FR
INFORMATIONS DE SÉCURITÉ IMPORTANTES
Lisez toutes les informations de
sécurité avant d‘utiliser l‘équipement.
Conservez ces instructions.
Indique une situation dangereuse qui, si elle
n‘est pas évitée, peut entraîner la mort ou des
blessures graves.
Pour réduire les risques d‘incendie ou
d‘explosion, de choc électrique et de blessures,
lisez et comprenez toutes les instructions
contenues dans ce manuel. Vous devez vous
familiariser avec les commandes et l‘utilisation
correcte de l‘équipement avant de commencer à
l‘utiliser.
ATTENTION – Pour réduire le risque
de choc électrique.
• Ne manipulez pas brutalement le cordon
d‘alimentation.
• N‘utilisez pas cet appareil si le cordon
d‘alimentation est endommagé. Il doit être
remplacé par un agent de service agréé du
fabricant ou un personnel qualifié.
• N‘utilisez jamais le cordon d‘alimentation
pour tirer, transporter ou débrancher le
Hammersmith Paint Blast.
• Tenez le cordon d‘alimentation loin de sources