HAMPTON BAY BEVERLY 65-510233

Need help?

Do you have a question about the HAMPTON BAY BEVERLY 65-510233 and is the answer not in the manual?

Overview

Beverly 5-Piece Sectional Sofa Set
Function Description
Important Technical Specifications
Usage Features
Maintenance Features
Beverly 5-Piece Sectional Coffee Table
Function Description
Important Technical Specifications
Usage Features
Maintenance Features
General Safety Information (Applicable to both products)
General Warranty Information (Applicable to both products)

This document is a user and care guide for the Hampton Bay Beverly 5-Piece Sectional Sofa Set and the Beverly 5-Piece Sectional Coffee Table. It provides instructions for assembly, safety information, warranty details, and maintenance guidelines for both products.

Beverly 5-Piece Sectional Sofa Set

Function Description:

The Beverly 5-Piece Sectional Sofa Set is an outdoor furniture set designed for seating. It consists of modular components that can be arranged to form a sectional sofa, providing comfortable seating with cushions and pillows. The set includes a right arm chair, a left arm chair, a middle chair, and a corner chair, which are connected using U-shape connectors to form a cohesive seating arrangement.

Important Technical Specifications:

Weight Limits:
- Chair: 300 lbs
- Swivel Chair: 300 lbs (though no swivel chair is explicitly listed as part of this 5-piece set, this limit is provided in the general safety information)
- Loveseat: 500 lbs (not explicitly part of this 5-piece set, but listed in general safety information)
- Ottoman: 150 lbs (not explicitly part of this 5-piece set, but listed in general safety information)
- Table: 50 lbs (refers to a separate table product, not the sofa components)
Hardware Included:
- Locking nut (Φ8 mm): 43 pieces
- Washer (Φ8 mm): 43 pieces
- Nut cap (Φ8 mm): 43 pieces
- Wrench (#13): 1 piece
- U Shape connector: 12 pieces
Package Contents (Right Arm Chair):
- Seat (A): 1
- Back (B): 1
- Right arm (C): 1
- Side skirt (D): 1
- Seat cushion (E): 1
- Back cushion (F): 1
- Pillow (G): 1
Package Contents (Left Arm Chair):
- Seat (H): 1
- Back (I): 1
- Left arm (J): 1
- Side skirt (K): 1
- Seat cushion (L): 1
- Back cushion (M): 1
- Pillow (N): 1
Package Contents (Middle Chair):
- Seat (O): 1
- Back (P): 1
- Skirt (Q): 2
- Seat cushion (R): 1
- Back cushion (S): 1
Package Contents (Corner Chair):
- Seat (T): 1
- Right back (U): 1
- Left back (V): 1
- Skirt (W): 2
- Seat cushion (X): 1
- Back cushion (Y): 2
- Pillow (Z): 1
Warranty: Two-year frame, weave, and fabric limited warranty against manufacturing defects to the original purchaser.

Usage Features:

Modular Design: The sectional sofa is composed of individual chair units (right arm, left arm, middle, corner) that are assembled and then connected using U-shape connectors (EE) to create a customized seating arrangement.
Assembly Process:
1. Attaching Arms to Seat: For right and left arm chairs, the respective arm (C or J) is placed on a soft surface, the seat (A or H) is placed over the arm's bolts, and then secured with washers (BB) and locking nuts (AA), hand-tightened.
2. Attaching Back to Seat and Arm: The back (B or I) is placed onto the bolts of the seat (A or H) and the arm (C or J), then fastened with washers (BB) and locking nuts (AA), hand-tightened. For middle chairs, the back (P) is attached to the seat (O) in a similar manner. For corner chairs, the right back (U) and left back (V) are attached to the seat (T).
3. Attaching Side Skirts: Side skirts (D or K or Q or W) are placed over the bolts on the seat and back, then secured with washers (BB) and locking nuts (AA), hand-tightened. Middle and corner chairs have multiple skirts.
4. Adding Caps and Cushions: After all nuts are fully tightened with the wrench (DD), nut caps (CC) are placed over them. Seat cushions (E, L, R, X), back cushions (F, M, S, Y), and pillows (G, N, Z) are then placed on the chairs.
5. Connecting Sectional Units: U-shape connectors (EE) are used to link the assembled sectional base units. One side of the clip is placed onto the sectional base, and then the other side is pressed to secure the connection.
Proper Setup: Ensure all parts are properly assembled and tightened. When placing the furniture, verify that all legs rest on the same surface, adjusting leg levelers as needed to ensure a rigid position.
Regular Examination: Periodically check for loose parts and re-tighten them fully before further use.

Maintenance Features:

Frame Cleaning: Wash the frame with a mild solution of soap and water, rinse with clean water, and dry thoroughly.
Cushion/Fabric Care:
- Cushions and mesh fabrics can be Scotchgarded for protection.
- Cushions can be cleaned by hand with a mild solution of soap and water. Rinse the cushion cover thoroughly and allow to drip dry.
- Back cushions and pillows should be spot cleaned with a soft cloth.
- Do not machine wash or tumble dry cushions, as they may shrink.
- Do not use bleach, solvents, or cleaners containing acid or abrasive materials on fabrics.

Beverly 5-Piece Sectional Coffee Table

Function Description:

The Beverly 5-Piece Sectional Coffee Table is a standalone table designed to complement the sectional sofa set. It features a table top and a lower shelf, providing surfaces for placing items.

Important Technical Specifications:

Weight Limit: Table: 50 lbs
Hardware Included:
- Locking nut (Φ8 mm): 4 pieces
- Washer (Φ8 mm): 4 pieces
- Nut cap (Φ8 mm): 4 pieces
- Bolt (Φ8x12 mm): 4 pieces
- Wrench (#13): 1 piece
- Hex wrench (5 mm): 1 piece
Package Contents:
- Table top (A): 1
- Legs (B): 4
- Lower shelf (C): 1
Warranty: Two-year frame, weave, and fabric limited warranty against manufacturing defects to the original purchaser (this warranty description seems to be generic and may not fully apply to a coffee table which typically does not have fabric or weave components, but it is listed in the manual).

Usage Features:

Assembly Process:
1. Attaching Legs to Table Top: The table top (A) is placed on a soft surface. The legs (B) are inserted into the four holes of the table top, ensuring they are oriented as shown in the photos. Bolts (DD) are used to fasten the legs, hand-tightened.
2. Attaching Shelf to Legs: The lower shelf (C) is fixed to the bolts on the legs. Washers (BB) and locking nuts (AA) are used to fasten the shelf, hand-tightened.
3. Adding Caps and Adjusting Levelers: All nuts (AA) are fully tightened with the wrench (EE), and then covered with nut caps (CC). All bolts (DD) are fully tightened with the Hex wrench (FF). Leg levelers are adjusted as required to ensure stability.
Proper Setup: Ensure all parts are properly assembled and tightened. When placing the table, verify that all legs rest on the same surface, adjusting leg levelers as needed to ensure a rigid position.
Regular Examination: Periodically check for loose parts and re-tighten them fully before further use.

Maintenance Features:

Frame Cleaning: Wash the frame with a mild solution of soap and water, rinse with clean water, and dry thoroughly.
General Care: Do not use bleach, solvents, or cleaners containing acid or abrasive materials.

General Safety Information (Applicable to both products):

Set Up Properly: Ensure all parts are assembled correctly and fully tightened. All legs should rest on the same surface, adjusting levelers as needed for rigidity.
Examine Furniture: Periodically check for loose parts and re-tighten them before additional use.
Observe Weight Limits: Adhere to the specified weight limits to prevent injuries.

General Warranty Information (Applicable to both products):

What is Covered: Frame, weave, and fabric are warranted to be free of manufacturing defects for two years to the original purchaser.
What is Not Covered: Freight and packaging charges to and from the service center, commercial use, hardware, acts of nature, fire, freezing, and abusive use. Purchased parts are also not covered. The manufacturer reserves the right to substitute similar merchandise if the model is no longer in production.
Customer Service: Contact 1-855-HD-HAMPTON or visit HAMPTONBAY.COM for assistance.