To Next PageTo Next Page
Need help?Do you have a question about the HAMPTON BAY YJAF-052-C and is the answer not in the manual?
General| Brand | Hampton Bay |
|---|---|
| Model | YJAF-052-C |
| Category | Patio Furniture |
| Material | Wicker |
| Color | Brown |
| Cushion Material | Polyester |
| Frame Material | Steel |
| Assembly Required | Yes |
| Cushion Color | Beige |
| Chair Type | Armchair |
| Weight Capacity | 250 lbs |
General precautions for product use and safety, including not using it as a toy or support.
Important warnings to prevent injury during assembly and use, such as keeping children away and avoiding high winds.
Details coverage for frame and fabric defects to the original purchaser for two years.
Specifies what manufacturing defects are included and lists exclusions like misuse or acts of nature.
Instructions to read all instructions before assembly and prepare on a soft surface.
Lists and identifies all hardware components required for assembly, with quantities.
Lists all the individual parts included in the umbrella package for verification.
Steps for connecting the upper bracket (B) onto the lower bracket (A).
Securing the lower umbrella pole (C) to the base brackets using hex bolts and washers.
Inserting the corner connectors (K) into the four ends of the assembled brackets.
Sliding the perforated lock panels (M) downward between the corner connectors (K).
Attaching side panels (L), support tube rims (J), and wires (O, P) to the base.
Instructions for placing and filling the sand bag (N) in the umbrella base.
Ensuring the locking mechanism is open and attaching the lower base cover (H).
Securing the lower base cover (H) by turning locking mechanisms to the CLOSE position.
Installing the locking knob (D) to the lower umbrella pole (C) using hex wrench and bolts.
Steps to prepare the umbrella shade (G) mechanism for attachment to the pole.
Attaching the solar receiver (E) to the umbrella shade (G) and plugging it in.
Guide for inserting and locking the umbrella shade (G) into the lower umbrella pole (C).
Instructions for attaching and detaching the crank (F) handle to the umbrella mechanism.
Steps to extend the umbrella by loosening the knob and pushing the bent tube upward.
Guide to opening the umbrella canopy using the crank and securing it with a belt.
Instructions for rotating the umbrella and adjusting its angle to shade sunlight.
How to turn the LED lights on and off using the ON/OFF switch.
Steps to properly close the umbrella canopy using the crank and securing it.
How to tie the umbrella to the pole with the Velcro belt when not in use.
Guidelines for cleaning the frame and fabric with a damp cloth and avoiding abrasive materials.
