HAMPTON BAY YJAF-819C-SCS

Need help?

Do you have a question about the HAMPTON BAY YJAF-819C-SCS and is the answer not in the manual?

Summary

Safety Information

Product Caution

Umbrella is for outdoor use, not a toy. Avoid open flames, severe weather, and do not use as a support.

Safety Warnings

Keep children away during assembly. Avoid high winds, heat sources, inclement weather, and secure when not in use.

Warranty

What is Covered

Covers manufacturing defects for frame (2 years) and fabric (5 years) for the original purchaser.

What is Not Covered

Excludes freight, commercial use, acts of nature, fire, freezing, abusive use, and purchased parts.

Pre-Assembly

Planning Assembly

Read all instructions before assembly. Assemble on a soft surface. More than one person may be needed.

Hardware Included

Lists and illustrates hardware parts (bolts, wrenches) used for assembly.

Package Contents

Lists and illustrates all parts included in the umbrella package.

Assembly

Attaching the Brackets

Instructions to attach the upper bracket (B) onto the lower bracket (A).

Attaching the Pedal to the Turn Plate

Connect the pedal (G) to the turn plate (H) using M6x10 bolt (AA) and M6 hex wrench (FF).

Pulling Out the Lower Umbrella Pole

Instructions to pull the lower umbrella pole (D) out from the base tube (C).

Attaching the Turn Plate to Brackets

Attach turn plate (H) to brackets (A & B) using M10x25 bolts (DD) and base tube (C) using M10x22 bolts (CC).

Pouring Sand and Water into Bases

Open side and middle bases, fill with sand/water, and close them clockwise.

Attaching Middle Bases to Brackets

Instructions to attach the middle bases (J) onto the brackets (A & B).

Attaching Side Bases to Brackets

Instructions to attach the side bases (I) to the brackets (A & B).

Inserting Middle Umbrella Pole

Insert base covers (K, L) and the lower umbrella pole (D) into the base tube (C).

Connecting Umbrella Shade to Base Tube

Connect the umbrella shade (F) to the base tube (C) using M6x15 bolt (BB) and M6 hex wrench (FF).

Attaching Crank to Umbrella Shade

Instructions to attach the crank (E) to the umbrella shade (F).

Operation

Opening the Umbrella

Shake fabric, press button, and turn crank (E) clockwise to open the umbrella.

Rotating the Umbrella

Hold pedal (G) and rotate umbrella pole for 360-degree movement.

Tilting the Umbrella

Push button on shade (F) and adjust position up or down to tilt.

Closing the Umbrella

Turn crank counterclockwise and press button on shade (F) to close the umbrella.

Tying Umbrella to Pole

Use the Velcro belt to tie the umbrella to the umbrella pole when not in use.

Attaching and Detaching the Crank

Instructions for attaching and detaching the crank (E) using the tap and hex wrench (FF).

Care and Cleaning

Cleaning Instructions

Clean with damp cloth, dry thoroughly. Do not use abrasive materials, bleach, or solvents.

Storage and Weather Precautions

Store sheltered when not in use. Keep away from fire, heat, freezing, and inclement weather.

This document is a Use and Care Guide for the Hampton Bay 10 ft x 10 ft Square Offset Umbrella, Model # YJAF-819C-SCS, Item # 1003 348 678.

Function Description

The Hampton Bay 10 ft x 10 ft Square Offset Umbrella is designed for outdoor use, providing shade and protection from the sun. It features an offset design, meaning the pole is positioned to the side rather than in the center, allowing for more flexible placement of furniture underneath. The umbrella can be opened and closed using a crank mechanism, rotated up to 360 degrees, and tilted to adjust the shade angle. The base is designed to be filled with sand and water for stability.

Important Technical Specifications

Dimensions: 10 ft x 10 ft (square canopy)
Type: Offset Umbrella
Rotation: Up to 360 degrees
Tilt Function: Yes
Base: Designed to be filled with sand and water for stability. The base consists of lower and upper brackets, a base tube, side bases, and middle bases.
Hardware Included:
- M6x10 bolt (AA): 1+1 quantity
- M6x15 bolt (BB): 1+1 quantity
- M10x22 combination bolt (CC): 4+1 quantity
- M10x25 combination bolt (DD): 4+1 quantity
- M10 hex wrench (EE): 1 quantity
- M6 hex wrench (FF): 1 quantity
Package Contents:
- Lower bracket (A): 1
- Upper bracket (B): 1
- Base tube (C): 1
- Lower umbrella pole (D): 1
- Crank (E): 1
- Umbrella shade (F): 1
- Pedal (G): 1
- Turn plate (H): 1
- Side base (I): 2
- Middle base (J): 2
- Upper base cover (K): 1
- Lower base cover (L): 1
Warranty:
- 2-year frame limited warranty
- 5-year fabric limited warranty
- Warranty covers manufacturing defects to the original purchaser.
- Warranty does not cover commercial use, hardware, acts of nature, fire, freezing, abusive use, or purchased parts.

Usage Features

Assembly: Requires more than one person for assembly. It is recommended to assemble on a soft, non-abrasive surface like carpet or cardboard to prevent damage. The umbrella should be set up in its desired location before assembly to avoid moving it later.
1. Attaching Brackets: The upper bracket (B) is attached to the lower bracket (A).
2. Attaching Pedal to Turn Plate: The pedal (G) is attached to the turn plate (H) using an M6x10 bolt (AA) and M6 hex wrench (FF).
3. Pulling out Lower Umbrella Pole: The lower umbrella pole (D) is pulled out from the base tube (C).
4. Attaching Turn Plate to Brackets: The turn plate (H) is attached to the brackets (A & B) using M10x25 combination bolts (DD) and M10 hex wrench (EE). The base tube (C) is then attached to the turn plate (H) using M10x22 combination bolts (CC) and M10 hex wrench (EE).
5. Pouring Sand and Water into Bases: The side bases (I) and middle bases (J) are opened by turning counterclockwise, filled with sand and water, and then closed by turning clockwise.
6. Attaching Middle Bases to Brackets: The middle bases (J) are attached onto the brackets (A & B).
7. Attaching Side Bases to Brackets: The side bases (I) are attached to the brackets (A & B).
8. Inserting Middle Umbrella Pole into Base Tube: The lower base cover (L), upper base cover (K), and lower umbrella pole (D) are inserted into the base tube (C).
9. Connecting Umbrella Shade into Base Tube: The umbrella shade (F) is connected into the base tube (C) using an M6x15 bolt (BB) and M6 hex wrench (FF).
10. Attaching Crank to Umbrella Shade: The crank (E) is attached to the umbrella shade (F).
Operation:
1. Opening the Umbrella: Shake the umbrella fabric, then press the button on the umbrella shade (F) and slowly turn the crank (E) clockwise to open.
2. Rotating the Umbrella: Hold the pedal (G) with one foot and rotate the umbrella pole. The umbrella can rotate up to 360 degrees.
3. Tilting the Umbrella: Push the button on the top of the umbrella shade (F) and push up or down to achieve the desired tilt position.
4. Closing the Umbrella: Slowly turn the crank in a counterclockwise direction to close. Press the button on the umbrella shade (F) and push down.
5. Securing the Umbrella: When not in use, tie the umbrella to the umbrella pole with the Velcro belt.
Crank Attachment/Detachment:
- Attaching without tap: The crank (E) can be attached without using the tap.
- Attaching with tap: Align the tap with the hole on the crank (E) until it snaps into place.
- Detaching: To detach the crank, the hex wrench (FF) is required to press the tap to release the crank (E).

Maintenance Features

Cleaning: For best results, clean the umbrella with a damp cloth and dry thoroughly. This helps prevent mildew by removing dirt particles.
Prohibited Cleaning Agents: Do not clean with abrasive materials, bleach, or solvents.
Storage: Store the umbrella in a sheltered place when not in use.
Weather Precautions: Keep the umbrella away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind. Always close and secure the product when not in use. Never use the umbrella in high wind conditions as damage can occur.
Safety: Do not locate the product near any heat source.
Product Caution: This product is intended for normal outdoor use. The manufacturer recommends storing or covering the umbrella when formidable/severe weather is approaching. Do not locate near open flames. Do not use as a support. Do not shake, lean, or climb on the product. Children under 10 near the product should be supervised by a competent adult. This product is NOT intended for commercial use and will void the warranty.