To Next PageTo Next Page
Need help?Do you have a question about the HAMPTON BAY YJAF052 and is the answer not in the manual?
General| Brand | HAMPTON BAY |
|---|---|
| Model | YJAF052 |
| Category | Patio Furniture |
| Language | English |
Precautions for safe use and intended purpose of the umbrella.
Critical safety warnings to prevent injury and damage during assembly and use.
Details of the frame and fabric warranty coverage for manufacturing defects.
Exclusions from the warranty, including misuse, freight, and commercial use.
Essential steps and advice, such as assembling on a soft surface, before starting.
List of all hardware components provided for assembly with their descriptions.
Inventory of all parts included in the umbrella package with quantities.
Connect the upper bracket (B) onto the lower bracket (A) for the base.
Attach the lower umbrella pole (C) to the base brackets using hex bolts and washers.
Insert corner connectors (K) into the four ends of the assembled base brackets.
Slide the perforated lock panels (M) downward between the corner connectors (K).
Slide the side panels (L) downward between the corner connectors (K).
Place the sandbag (N) in the umbrella base to provide stability.
Fill the sand bags (N) with sand, ensuring 100 lbs per bag for optimal stability.
Ensure the locking mechanism on the lock panel (M) is in the OPEN position.
Lock the lower base cover (H) by turning mechanisms to the CLOSE position.
Attach the knob (D) to the lower umbrella pole (C) using M5x8 bolts (CC).
Push down and pull the hinge to prepare the upper umbrella pole (G).
Attach the solar receiver (E) to the top of the upper umbrella pole (G).
Insert the upper umbrella pole (G) into the lower umbrella pole (C).
Attach the crank (F) to the handle, aligning holes to lock it securely.
Loosen the knob, slide the handle upward, and tighten the knob to lock.
Release the belt, turn the crank clockwise to slowly open the umbrella canopy.
Loosen the knob, rotate the shade, then tighten the knob to secure the desired position.
Use ON/OFF switch for lights; adjust angle by loosening/tightening knob.
Move crank up, loosen belt, turn crank counterclockwise to close the umbrella.
Tie the umbrella closed using the belt when not in use for storage.
Clean frame and fabric with damp cloth; avoid abrasive materials and solvents.
Store in dry place; tie canopy closed on windy days; keep away from elements.
