To Next PageTo Next PageWhat to do if my HAMPTON BAY HB7072LED-05 Outdoor Light will not turn on?
If your HAMPTON BAY Outdoor Light isn't turning on, ensure the power supply is active. You may also want to test or replace the switch and check the wiring. If these steps don't resolve the issue, consider replacing the driver.
General| Brand | Hampton Bay |
|---|---|
| Model | HB7072LED-05 |
| Power Source | Hardwired |
| Light Color | White |
| Material | Aluminum |
| Finish | Black |
| Bulb Type | LED |
| Voltage | 120V |
| Color Temperature | 3000K |
| Dimmable | No |
| Weather Resistance | Yes |
| IP Rating | IP44 |
| Light Type | Outdoor Light |
Disconnect power before installation or removal of a previous fixture.
Warning against unauthorized modifications that may void user's authority.
Consult electrician for electrical issues; contact support for non-electrical questions.
Manufacturer warrants against defects in materials and workmanship for five years.
Excludes improper installation, misuse, abuse, accident, and normal wear and tear.
Read all instructions and prepare before starting assembly and installation.
List of necessary tools for installation, including screwdrivers, cutters, ladder, etc.
List of all hardware components included for installation, with part descriptions.
List of all parts included in the package, such as fixture pan, glass shade, and cage.
Steps to install the mounting bracket and fixture pan using screws and nuts.
Instructions for connecting supply wires to fixture wires using wire nuts.
Securing the fixture pan to the mounting screws using lock nuts.
Placing and securing the glass shade and cage onto the fixture pan.
Instructions to turn on the fixture via circuit breaker and light switch.
Use a dry or slightly dampened clean cloth to wipe the fixture surface.
Disconnect power and use a dry/dampened cloth for interior cleaning.
Information on ENERGY STAR driver replacement and contacting an electrician.
Device tested and found to comply with FCC limits for Class B digital devices.
Measures to correct potential radio frequency interference if not installed properly.
Solutions include checking power supply, switch, wiring, or replacing the driver.
Solution involves checking the wire connections for faults.
