HAMPTON BAY HD33679 - User Manual

Item #1001 000 000
Model #HD33679
Use and Care Guide
LOW VOLTAGE FLOODLIGHT KIT
Part Description Quantity
A
Heads
4
B
Adjustment screw
8
C
Posts
4
D
Spikes
4
E
Connectors
4
F
45W transformer
1
G
Cable
1
H
Screw
1
I
Plastic anchor
1
PACKAGE CONTENTS
Assembly and Installation
1
Attaching and installing the pathlight
WARNING: Never push the xture into the ground by the head or use a hammer
to insert the spike (D) into the ground.
CAUTION: Safe for outdoor operation.
WARNING: To reduce the risk of FIRE OR INJURY TO PERSONS:
WARNING: Do not operate the luminaire tting with a missing or damaged lens
or bulb protector.
□ Carefully remove the xture from its protective packaging.
□ Screw the post (C), the spike (D) and the oodlight’s head (A)
together.
WARNING: Install in accordance with all local codes and ordinances.
Only for use with low voltage power units with a maximum output rating of 15V,
300W per secondary.
FOR LANDSCAPE LIGHTING SYSTEMS ONLY. OUTDOOR USE ONLY. THE DEVICE IS
ACCEPTED AS A COMPONENT OF A LANDSCAPE LIGHTING SYSTEM WHERE THE
SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY CSA OR LOCAL
INSPECTION AUTHORITIES HAVING JURISDICTIO
N.
FLOODLIGHT ETL LISTED UNDER MODEL # U000-1998
Please read and save these instructions
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
IMPORTANT SAFETY INSTRUCTIONS
Lighted lamp is HOT!
2
Connecting the wires
WARNING: The wire connector (E) contacts have sharp edges for piercing the
main low voltage cable. To avoid injury, do not touch the metal contacts.
CAUTION: The wire from the low voltage power unit shall be 12-18 AWG type
underground low Energy Circuit Cable or SPT2W.
IMPORTANT:
• Protectthewiringbyroutingitincloseproximitytothelighttting,ornexttoa
building structure such as a house or deck.
• Thelandscapewireandconnectorcanalsobehiddenunderstoneorburied
under grass at a maximum depth of 6 in. (15.24 cm).
• Donotsubmergethextureinwater.
WARNING: Risk of Electric Shock. Install all luminaires 10 ft. (3.05 m) or more
from a pool, spa or fountain.
A
B
C
D
E
F
G
D
A
B
C
E
I
H
WARNING: There are no serviceable parts inside the power supply unit. DO NOT
DISASSEMBLE.
WARNING: Do not submerge the transformer.
WARNING: Do not connect two or more transformers in parallel.
WARNING: For use with 12 volt low voltage outdoor landscape lighting system only.
Not for use with submersible light or pool/spa equipment.
WARNING: Do not use with a dimmer.
CAUTION: Plug the power supply unit directly into a GFCI outlet that is marked “wet
location”. The maximum output of this transformer is 45 watts. Do not overload
the
transformer. Be sure that the total cumulative wattage of all 12 volt xtures connected
to the transformer is equal to or less than 45 watts. This garden light system must be
installed in accordance with all local codes and ordinances. If you are experiencing
problems, contact a qualied electrician.
WARNING: Do not use an extension cord.

Summary

Assembly and Installation

Safety Instructions

Essential safety guidelines and warnings for fire risk, injury prevention, and proper use of the lighting fixture.

Attaching and Installing the Pathlight

Detailed steps for physically attaching the pathlight fixture to its post and spike for ground insertion.

Connecting the Wires

Instructions on how to connect the landscape wire to the fixture's connector and the main cable.

Installing the Transformer

Guidelines for installing the weatherproof transformer, including placement and mounting options.

Connecting Cable to Transformer

Steps for connecting the landscape wire to the transformer's terminals for power distribution.

Transformer Operation

How to operate the transformer using its push button for ON, Auto, and timed modes.

Care and Cleaning

Troubleshooting

Warranty Information

Cable Selection Guide

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document describes the Hampton Bay Low Voltage Floodlight Kit, model #HD33679, an outdoor landscape lighting system designed for aesthetic and functional illumination.

Function Description:

The Hampton Bay Low Voltage Floodlight Kit is an outdoor lighting system that provides low-voltage illumination for landscapes. It consists of four floodlight heads, posts, spikes, and connectors, powered by a 45W transformer. The system is designed for easy assembly and installation, allowing users to enhance their outdoor spaces with directed lighting. The transformer offers multiple operating modes, including ON, Auto (dusk-to-dawn), 2H, 4H, 6H, and 8H, providing flexibility in controlling when the lights turn on and off. The "Auto" mode utilizes a photocell to detect dusk and dawn, automatically activating and deactivating the lights. The timed modes (2H, 4H, 6H, 8H) turn on at dusk and then turn off after the selected duration.

Important Technical Specifications:

• Model Number: HD33679
• Item Number: #1001 000 000
• Power Unit Output Rating: Maximum 15V, 300W per secondary.
• Transformer Output: Maximum 45 watts.
• Cable Type: 12-18 AWG type underground low Energy Circuit Cable or SPT2W.
• Fixture Type: ETL listed floodlight, model #U000-1998.
• Installation Requirements:
  • Transformer must be plugged directly into a GFCI outlet marked "wet location."
  • GFCI receptacle and watertight protective cover must be installed by a qualified electrician, mounted a minimum of 12 inches (0.3 m) above ground level.
  • Transformer must be mounted at least 1 foot (0.3 m) above ground level.
  • Floodlights must be installed 10 feet (3.05 m) or more from a pool, spa, or fountain.
  • Landscape wire and connector can be hidden under stone or buried under grass at a maximum depth of 6 inches (15.24 cm).
• Cable Selection Guidelines (for 12 VOLT TAP):
  • 0-60 Watts: 16 AWG for 0-100 feet, 14 AWG for 101-150 feet.
  • 61-120 Watts: 16 AWG for 0-50 feet, 14 AWG for 51-100 feet, 12 AWG for 101-150 feet.
  • 121-180 Watts: 14 AWG for 0-50 feet, 12 AWG for 51-100 feet, NOT RECOMMENDED for 101-150 feet.
  • 181-240 Watts: 14 AWG for 0-50 feet, 12 AWG for 51-100 feet, NOT RECOMMENDED for 101-150 feet.
  • 241-300 Watts: 12 AWG for 0-50 feet, NOT RECOMMENDED for 51-150 feet.
  • 600W Transformer (2X300) Watts: 12 AWG for 0-50 feet, NOT RECOMMENDED for 51-150 feet.
  • 900W Transformer (3X300) Watts: 12 AWG for 0-50 feet, NOT RECOMMENDED for 51-150 feet.
• Cable Selection Guidelines (for 15 VOLT TAP):
  • 0-60 Watts: 16 AWG* for 0-150 feet.
  • 61-120 Watts: 16 AWG* for 0-100 feet, 12 AWG for 101-150 feet.
  • 121-180 Watts: 14 AWG* for 0-100 feet, 12 AWG for 101-150 feet.
  • 181-240 Watts: 14 AWG* for 0-100 feet, 12 AWG for 101-150 feet.
  • 241-300 Watts: 12 AWG* for 0-100 feet, NOT RECOMMENDED for 101-150 feet.
  • 600W Transformer (2X300) Watts: 12 AWG* for 0-100 feet, NOT RECOMMENDED for 101-150 feet.
  • 900W Transformer (3X300) Watts: 12 AWG* for 0-100 feet, NOT RECOMMENDED for 101-150 feet.
  • *NOTE: AWG marked with an asterisk is NOT RECOMMENDED for HALOGEN LANDSCAPE LIGHTS.
• LED Compatibility: Most LED landscape lighting fixtures can operate with full illumination from 9V down to as little as 6V, allowing for extended length runs beyond the specified guidelines.

Usage Features:

• Outdoor Operation: The system is designed specifically for outdoor use and is weatherproof.
• Easy Assembly: Floodlight heads, posts, and spikes screw together for straightforward assembly.
• Flexible Installation:
  • Pathlight Installation: The floodlight head, post, and spike are screwed together. The spike is then inserted into the ground. Users are warned not to push the fixture into the ground by the head or use a hammer.
  • Wire Connection: Wire connectors are placed on opposite sides of the low voltage cable, aligned, and pressed together until fully seated. The pre-set prongs pierce the cable insulation to establish contact. Electrical tape is recommended for additional protection after the connector is in place.
  • Transformer Mounting: The transformer can be mounted using a support screw (H) in a wall near an electrical outlet (standard wall mounting) or by drilling a 5/16 inch (8 mm) hole, inserting a plastic anchor (I), and then the screw (brick or cement wall mounting). The transformer must be mounted at least 12 inches (30 cm) above ground.
• Multiple Operating Modes: The transformer features a push button to select between ON, Auto (dusk-to-dawn), 2H, 4H, 6H, and 8H modes, offering customizable lighting schedules.
• Safety Features:
  • Requires connection to a GFCI outlet.
  • Designed for low voltage systems only.
  • Warnings against submerging the transformer, using with a dimmer or extension cord, and connecting multiple transformers in parallel.
  • Wire connector contacts are sharp; users are advised not to touch them.

Maintenance Features:

• Cleaning: Clean the fixture with a soft, dry cloth. Avoid using cleaners with chemicals, solvents, or harsh abrasives.
• Troubleshooting Guide: The manual provides a troubleshooting section for common issues:
  • Fixture not lighting: Check power, connections at the transformer, photocell proximity to light sources, and total wattage.
  • Only some lights working: Check the fixture's connector or LED, ensuring wire stabs have pierced the landscape wire.
• Non-Serviceable Parts: The power supply unit contains no serviceable parts; users are warned not to disassemble it.
• Warranty: The manufacturer offers a five-year warranty from the date of purchase, covering defects in materials and workmanship under normal use and service. The warranty is limited to repair or replacement of the product and does not cover damage from misuse, abuse, accident, modifications, alterations, neglect, mishandling, improper installation, or normal wear and tear.
• Customer Support: Contact information (1-855-HD-HAMPTON or www.hamptonbay.com) is provided for customer service.

HAMPTON BAY HD33679 Specifications