a. Electrical & Mounting Hardware
(3 plastic wire connectors, 1 hanger pin, 1
locking pin)
b. Close-to-Ceiling mount hardware
(1 rubber gasket)
c. Blade attachment hardware
(16 screws)
d. Miscellaneous Parts
(1 pull chain)
7. Blades (5)
8. Blade Bracket (Flange) Set (5)
with blade bracket screws pre-installed
1. Slide-On Mounting Plate (inside canopy)
2. Ball/Downrod Assembly
3. Canopy with Canopy Ring attached
4. Fan Motor Assembly
5. Switch Cup
6. Decorative Motor Collar Cover
2. Unpacking Your Fan
IMPORTANT: THIS PRODUCT AND/OR COMPONENTS ARE COVERED BY
ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,947,436; 5,988,580;
5,971,573; 6,010,110; 6,010,306; 6,039,541; 6,046,416 AND OTHER
PATENTS PENDING.
Unpack your fan and check the contents. You should have the following items:
8
6
5
4
3
2
1
7
c
a
b
d
To Next Page
Loading...
