To Next PageTo Next PageWhat to do if only some HAMPTON BAY SL-200-12A lights work?
If only some of your Hampton Bay Transformer lights are working, check the connector to ensure the wire barbs have pierced the landscape cable. Also, if you're using halogen or incandescent bulbs, they might be burned out. Be careful, as the bulbs may be hot.
Why don't my Hampton Bay Transformer lights switch on at dusk?
If your Hampton Bay Transformer lights don't switch on at dusk, the photocell may be in an area with too much constant light at night. This prevents the system from turning on as it should.
How to troubleshoot all lights failing on Hampton Bay Transformer?
If all of your Hampton Bay Transformer lights aren't working, first, ensure the transformer has power. Then, check for loose connections where the cable connects to the transformer's screw terminals. Finally, verify that the power switch isn't set to the OFF position.
Why are my HAMPTON BAY SL-200-12A lights on during the day?
If your Hampton Bay Transformer lights are on during the day, it might be because the photocell is located in a dark area. This can trick the lights into turning on when they shouldn't.
General| Input Voltage | 120V AC |
|---|---|
| Weather Resistant | Yes |
| Application | Landscape Lighting |
| Frequency | 60 Hz |
| Overload Protection | Yes |
| Thermal Protection | Yes |
| Short Circuit Protection | Yes |
| Power Rating | 200 Watts |
| Output Voltage | 12V AC |
Details manufacturer's warranty for defects in materials and workmanship for two years from purchase.
Excludes warranty coverage for improper installation, misuse, accidents, or normal wear and tear.
Lists necessary tools like a claw hammer, electrician's knife, and Phillips screwdriver for installation.
Identifies the specific hardware components provided with the transformer for mounting and assembly.
Details all items included in the package, including the transformer, photocell, and mounting hardware.
Instructions for correctly stripping and preparing the low-voltage landscape wire for connection.
Step-by-step process for securely connecting the landscape cable to the transformer's terminals.
Guidance on positioning outdoor fixtures and laying out the low-voltage cable to each fixture.
Instructions on using cable connectors to attach fixtures to the main cable and ensure proper connection.
Details on how to mount the transformer securely to a wall at the recommended height range.
Instructions for installing the photocell for automatic light control, including placement advice.
Recommendations for covering or burying the landscape cable after installation for safety and aesthetics.
Procedure to set the transformer's internal clock to the correct local time.
Instructions for manually turning the landscape lights on and off using the device controls.
Configures the photocell to automatically activate lights at dusk and deactivate them at dawn.
Allows setting specific times for lights to turn on (dusk) and turn off.
Allows manual setting of specific times for the lights to turn on and turn off.
Guide to testing the photocell and lighting system functionality after installation.
Information on how transformer functions may require resetting after a power interruption.
Explanation of the transformer's display and LED lights automatically turning off after inactivity.
Steps to reset the transformer to its original factory default configuration.
Addresses common problems like lights not working or staying on during the day, with probable causes.
Provides guidelines for selecting appropriate wire gauge based on fixture wattage and cable length.
