To Next PageTo Next PageWhat to do if only some Hampton Bay Transformer lights work?
If only some of your Hampton Bay Transformer lights are working, check the connector to ensure the wire barbs have pierced the landscape cable. Also, if you're using halogen or incandescent bulbs, they might be burned out. Be careful, as the bulbs may be hot.
Why don't my Hampton Bay Transformer lights switch on at dusk?
If your Hampton Bay Transformer lights don't switch on at dusk, the photocell may be in an area with too much constant light at night. This prevents the system from turning on as it should.
How to troubleshoot all lights failing on HAMPTON BAY SL-60-12-SV Transformer?
If all of your Hampton Bay Transformer lights aren't working, first, ensure the transformer has power. Then, check for loose connections where the cable connects to the transformer's screw terminals. Finally, verify that the power switch isn't set to the OFF position.
Why are my HAMPTON BAY SL-60-12-SV lights on during the day?
If your Hampton Bay Transformer lights are on during the day, it might be because the photocell is located in a dark area. This can trick the lights into turning on when they shouldn't.
General| Brand | HAMPTON BAY |
|---|---|
| Model | SL-60-12-SV |
| Category | Transformer |
| Language | English |
Crucial safety guidelines to prevent fire and injury, covering installation and usage of the transformer.
Information on FCC regulations for Class B devices and how to mitigate radio frequency interference.
Specifies what is covered under the manufacturer's warranty for the transformer.
Lists conditions and issues not covered by the transformer's warranty.
Critical warnings about cable usage and installation to avoid fire or electric shock risks.
Lists required tools, included hardware, and all components found in the package.
Step-by-step instructions on how to properly prepare the landscape wire for connection to the transformer.
Guidance on securely connecting the landscape cable wires to the transformer's terminal plates.
Instructions for positioning light fixtures and laying out the low voltage cable, including distance requirements.
Procedure for connecting the light fixtures to the main cable using provided connectors.
Detailed steps for securely mounting the transformer unit to a wall surface at the recommended height.
Instructions for installing the photocell sensor and optimizing its placement for automatic operation.
Methods for protecting and hiding the landscape cable after installation, including burial depth.
Description of the default setting where lights turn on at dusk and off at dawn.
How to set the lights to turn on at dusk for a specified duration (1-12 hours).
Instructions for manually turning the landscape lights on and off using the dedicated button.
Procedure to reset the transformer to its original factory default operating mode.
Addresses typical problems like lights not working, partial failures, or incorrect operation, with probable causes.
