Hamron 009-120 - Product Information; Symbols and Important Warnings; Technical Specifications Overview

EN
29
Symbols
Important:
Read the instructions.
Wear ear protection.
Wear safety glasses.
Wear safety gloves.
The tool has double insulation.
TECHNICAL DATA
Rated voltage 230 VAC / 50 Hz
Output 450 W
Speed (no load) 0–3200 rpm
Stroke rate 0–3200 spm
Torque 400 Nm
Square drive 1/2"
Safety class II
Sound pressure level, LpA 87.5 dB(A), K=3 dB
Sound power level, LwA 98.5 dB(A), K=3 dB
Vibration level 9.93 m/s², K=1.5 m/s²
Always wear ear protection.
The declared vibration value, which has been measured by a standardised test method, can be used
to compare dierent tools with each other and for a preliminary assessment of exposure.
WARNING: The actual vibration level when using power tools may dier from the specied maximum
value, depending on how the tool is used. It is therefore necessary to determine which safety
precautions are required to protect the user, based on an estimate of exposure in actual operating
conditions (taking into account all stages of the work cycle, e.g. the time when the tool is switched
o and when it is idling, in addition to the start-up time).