What to do if air has got into my Hamron 601-060?
If air has entered the Hamron Jacks, open the relief valve by turning it one full turn. Lift the back wheels until the jack is straight up. Pump the handle. Then, close the valve and test the jack.
How to fix low hydraulic oil level in Hamron Jacks?
To address a low hydraulic oil level in Hamron Jacks, remove the filler plug and fill up with clean hydraulic oil specifically designed for jacks.
Read user instructions carefully before use and save them for future reference.
Details specifications including lift capacity, max load, and lifting height.
Illustrates key components of the jack, such as pump fixture and saddle.
Step-by-step guide on operating the jack for lifting and lowering loads.
Guidance on proper storage, oil, and cleaning to maintain the jack.
Identifies common issues and provides solutions for operational problems.
General| Model | 601-060 |
|---|---|
| Category | Jacks |
| Type | Hydraulic Bottle Jack |
| Maximum Load | 2000 kg |
| Capacity | 2 Ton |
| Weight | 4.5 kg |
To Next Page