EN
13
SAFETY INSTRUCTIONS
Read the user instructions carefully before use.
Save them for future reference.
• Never overload the product (max load 2 tonnes).
• The jack is only intended for lifting. Block up the load immediately after lifting,
for example, with jack stands.
• Check before lifting that the parking brake is applied and that the wheels are
wedged so that the vehicle cannot roll.
• Always place the jack on a level, hard surface otherwise there is a risk of the
load falling over and causing personal injury and/or material damage.
• Always put the middle of the saddle directly under the part to be lifted.
• The product has a default overload valve. Bo not attempt to modify the
overload valve.
TECHNICAL DATA
Lift capacity 1500 kg
Max load 2000 kg
Lifting height 128 - 300 mm
DESCRIPTION
User instructions for jack
ENGLISH
CLOSE
OPEN
LOAD
SADDLE
RELIEF VALVE
PUMP FIXTURE
To Next Page
Loading...