Chapter 5
Hanatech Co., Ltd..
Chapter 5 - 7
f In case the control module does not respond after trying all OBD2
standard protocols, MULTISCAN P2 shows the failure report and check
points as below:
2. When to select
You may select this General OBD2 when you are sure that the test vehicle is
OBD2 compliant but not included in the vehicle coverage list.
3. EOBD
a In Europe, EOBD has become mandatory from January 1, 2001, and all
the cars built in Europe since then on must have been generic OBD2
compliant.
b You may select General OBD2 of DCN-PRO for the diagnosis of
European cars for 2000 and later model year vehicles for the powertrain
system. .
To Next Page
Loading...