Why is the weight readout wrong on my Hanchen Scales?
If the weight readout on your Hanchen Scales is obviously wrong, it could be due to a couple of reasons. First, the balance might not have been calibrated or adjusted before weighing, in which case you should calibrate or adjust the balance. Second, the balance might not have been zeroed before weighing; make sure to zero the balance before you start weighing.
What to do if no segments appear on the display of my Hanchen BSM?
If no segments appear on the display of your Hanchen Scales, there are a few potential causes. First, check the AC power supply and ensure the power supply is plugged in. Second, the load might exceed the balance capacity, so try unloading the balance. Finally, ensure nothing is touching the weighing pan; if something is, move it.
What to do if my Hanchen BSM display E22?
If your Hanchen Scales are showing an E22 error, it means the poise weight is not enough. To resolve this, load on enough poise for weighing.
What does E11 mean on Hanchen Scales?
If your Hanchen Scales are showing an E11 error, it indicates that the calibrate weight is wrong. To fix this, load weight on the poise to recalibrate.
What does E12 mean on Hanchen Scales?
If your Hanchen Scales are showing an E12 error, it means the calibrate weight is unstable. You should eliminate the unstable factor and then recalibrate.
How to fix if maximum capacity is less than the data list in the Technical specification of Hanchen BSM?
To address this issue, switch on the Hanchen balance without the weighing pan. Then, place the weighing pan and restart the balance while pressing the ?? button.
Introduces the BSM series balances and their general capabilities.
Critical instructions to ensure safe operation and prevent equipment damage.
Guidance on unpacking, installation, conditioning, and leveling the balance.
Identifies and explains the balance's display indicators and control buttons.
Step-by-step instructions for performing simple weight measurements.
Procedures for ensuring balance accuracy through calibration.
Detailed steps for calibrating the balance using external weights.
How to use the counting function for piece measurement.
Procedure for obtaining weight readings as a percentage.
Method for calculating the density of solid objects.
Technique for weighing unstable samples by averaging.
How to switch between different units of weight measurement.
Navigating menu codes and understanding parameter settings.
Solutions for common error codes and operational issues.
Procedures for cleaning, repairs, and safety checks.
General| Brand | Hanchen |
|---|---|
| Model | BSM Series |
| Category | Scales |
| Type | Precision Balance |
| Calibration | External Calibration |
| Tare Function | Yes |
| Overload Protection | Yes |
| Readability | 0.001g |
| Repeatability | ±0.001g |
| Linearity | ±0.002g |
| Platform Size | Varies by model |
| Material | Stainless Steel |
| Display | LCD |
| Units | g, oz, lb, ct |
| Interface | RS232 |
To Next Page
