Need help?Do you have a question about the Hand Held Products 4600g and is the answer not in the manual?
General| Scanning Technology | Laser |
|---|---|
| Interface | USB, RS-232, Keyboard Wedge |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -40°C to 60°C (-40°F to 140°F) |
| Connectivity | Corded |
| Light Source | Visible laser diode 650 nm |
| Scan Pattern | Single Line |
| Decode Capabilities | 1D Barcodes |
| Humidity | 5% to 95% (non-condensing) |
| Decode Capability | 1D |
Lists the interfaces that can be used with your imager.
Details the process of connecting the imager to a USB port.
Configures the imager to emulate a wand reader for data transmission.
Provides guidance on how to properly aim and read barcodes with the imager.
Lists terminals supported by the imager and their corresponding Terminal IDs.
Allows programming the keyboard layout for different countries.
Sets the data transmission rate between the imager and terminal.
Configures beeper and LED feedback for successful barcode reads.
Defines how the imager is activated for scanning operations.
Configures the imager to automatically scan presented barcodes.
Narrows the imager's field of view to target specific barcodes.
Explains how to add data before or after scanned barcode data.
Configures delays to improve data transmission integrity.
Guides users through creating custom data formats for barcode output.
Controls whether input data must conform to an edited format.
Details primary and secondary interfaces supported by different imager models.
Explains configuring the secondary RS-232 interface parameters.
Enables or disables decoding of all supported barcode symbologies.
Configures settings for the Codabar barcode symbology.
Configures settings for the Code 39 barcode symbology.
Configures settings for the Code 128 barcode symbology.
Configures settings for the UPC-A barcode symbology.
Configures settings for the Data Matrix barcode symbology.
Captures an image using various modifiers for style, beeper, and trigger.
Transmits captured images with modifiers for filters, format, and quality.
Configures size and location for signature capture relative to barcodes.
Selects or disables OCR fonts for character recognition.
Guides users in defining custom templates for OCR character strings.
Programs check character calculation for OCR string security.
Maps function codes, hex values, and ASCII controls for terminal compatibility.
Lists interface key mappings for various terminals and systems.
Restores the imager to its original factory settings.
Assesses the quality of 2D barcode reads with detailed reports.
Introduces PC software for imager configuration, upgrades, and programming.
Details the structure and components of menu commands.
Describes special characters used to query device settings.
Lists serial commands for setting keyboard country layouts.
Lists serial commands for setting RS-232 baud rates.
Provides detailed physical and electrical specifications for the 4600g/4600r models.
Details pinouts for keyboard wedge, wand emulation, serial, and USB cables.
Provides instructions for cleaning the imager window and housing.
Offers guidance to isolate and resolve common imager problems.
Lists contact information for technical support by region.
Explains the process for obtaining warranty or non-warranty service.
Provides a reference for barcode symbologies, AIM IDs, and hex codes.
Displays examples of various barcode symbologies and their data.
Lists barcodes used for programming OCR templates and characters.
To Next Page
