Need help?Do you have a question about the Hand Held Products HANDHELD 3800G and is the answer not in the manual?
General| Brand | Hand Held Products |
|---|---|
| Model | HANDHELD 3800G |
| Category | Barcode Reader |
| Language | English |
Instructions for connecting the imager as a USB keyboard for PC or Mac.
Steps for connecting the imager as a keyboard wedge via serial port.
Procedures for connecting the imager to a computer using an RS-232 serial port.
Process for setting the imager's Terminal ID for specific host systems.
Configuring the communication speed for RS-232 connections.
Settings for data bits, stop bits, and parity in RS-232 communication.
Options for RTS/CTS, XON/XOFF, and ACK/NAK handshaking.
Programming the imager to output scanned data in a specific order or format.
Step-by-step guide to adding prefixes or suffixes to scanned data.
Steps to add primary or alternate data formats to the imager.
Procedures to enable, disable, and retain secondary interface settings.
Enabling all symbologies or specific ones, and setting message length parameters.
Detailed configuration for symbologies like Codabar, Code 39, UPC/EAN, etc.
Overview of Visual Xpress capabilities: scanning data, configuring, and imaging.
Explains conventions, syntax, and structure for serial programming commands.
Details on dimensions, weight, light source, scan rate, and voltage requirements.
Steps for replacing the cable and initial troubleshooting guidance.
Phone numbers and emails for technical assistance by region.
Reference chart listing symbologies, their codes, and identifiers.
Charts for ASCII character conversion and code page mapping for barcodes.
To Next Page
