To Next PageTo Next Page
Need help?Do you have a question about the Handicare SystemRoMedic ReTurn7500 and is the answer not in the manual?
General| Brand | Handicare |
|---|---|
| Model | SystemRoMedic ReTurn7500 |
| Category | Medical Equipment |
| Language | English |
Check product condition and function regularly. Ensure material is free from damage and inspect/service if signs of wear appear.
Always read manuals for assistive devices used during transfers. Keep manuals accessible and do not leave patients unattended.
Push rising ladder into mounting fixtures, ensuring height-adjustment buttons face caregiver. Insert and tighten fixture knobs securely.
Chassis and raising ladder can be carried separately. Disassembles into two pieces for easy transport and storage, e.g., by car.
Intended for shorter transfers on flat floors. Caregiver must apply counter pressure. Perform risk assessment; patient must support weight and balance.
Feet placed on either side per markings. Patient weight must be centered on the support surface between the wheels.
Adjust support height so upper edge is 3cm below kneecaps. Ensure pins lock securely. Lateral adjustment is also possible.
Engage brakes by pressing down on red marking. Release by pressing the plate back to green marking to ensure wheels roll freely.
Ideal for assessing patient's ability to rise from seated to standing position when uncertainty exists.
Use ReTurn to train patient's standing, sitting, and sit-to-stand abilities. Time progress with a stopwatch.
Guide for positioning ReTurn between bed and wheelchair, patient grasping ladder, and caregiver applying counter pressure.
Use ReTurn to reposition a patient sliding forward in a wheelchair. Patient lifts slightly, caregiver provides counter pressure.
Details on using ReTurnBelt with ReTurn7500 for enhanced support and safety during transfers.
Instructions for two caregivers using ReTurnBelt, emphasizing patient leaning and caregiver grip.
Instructions for one caregiver using ReTurnBelt, focusing on securing clasp and supporting patient.
Step-by-step guide for attaching the ReTurnBelt to the ReTurn7500, including variations for standard and open-handle models.
Procedure for safely assisting a patient to sit down using the ReTurn and ReTurnBelt, ensuring secure positioning.
Details on ReTurn's design for toilet/shower transfers, allowing caregiver access and patient positioning.
Guidelines for cleaning the ReTurn using mild agents, avoiding solvents, and using 70% alcohol for disinfection.
A transfer belt designed to aid in raising and support during transfers with the ReTurn system.
Straps to secure the patient's heels, providing stability during standing and transfers.
Straps to provide additional support and grip points for the patient during transfers.
Optional padding for the leg support, enhancing patient comfort during use.
