H&K 87050.01P - User Manual

Questions and Answers

C
Craig MillerAug 6, 2025
What to do if H&K 87050.01P Commercial Food Equipment refrigerator won't reach target temperature?
- S
  Sean MartinezAug 6, 2025
  If your H&K Commercial Food Equipment refrigerator isn't reaching the target temperature, there are several possible reasons. First, the condenser coil might be dirty; try cleaning it with a vacuum cleaner or soft brush. Second, ensure the drawer isn't left open for too long. Third, check that the room temperature and humidity are within the recommended maximums (100ºF (38ºC) 50% RH max). Finally, inspect the drawer gasket for damage and proper sealing. If the gasket is broken, you can order a replacement.
M
Michelle HooverAug 11, 2025
What to do if H&K Commercial Food Equipment unit does not run after plugging in?
- S
  Sherry HillAug 11, 2025
  If your H&K Commercial Food Equipment isn't running after being plugged in, first ensure the unit is fully plugged into the outlet. Next, verify that the wall receptacle is working by plugging the refrigerator into another outlet. If the wall receptacle isn't working, contact a licensed electrician to repair it. Also, check the circuit breaker to see if it has tripped and reset it if necessary.
A
amy96Aug 17, 2025
What does 'def' mean on my H&K 87050.01P Commercial Food Equipment controller?
- K
  Katherine McdonaldAug 17, 2025
  If your H&K Commercial Food Equipment controller reads 'def', it means the unit is currently in defrost cycle. If the unit does not return to normal operation after 1 hour, further assistance may be needed.
M
Mikayla JonesAug 23, 2025
What does 'rec' mean on my H&K Commercial Food Equipment controller?
- K
  Kyle ParkAug 25, 2025
  If your H&K Commercial Food Equipment controller reads 'rec', it indicates that the unit is in recovery mode after defrost. If the unit does not return to normal operation after 1 hour, further assistance may be needed.
E
Erica TurnerAug 30, 2025
What does 'E1' mean on my H&K Commercial Food Equipment controller?
- M
  Melissa StoneAug 30, 2025
  If your H&K Commercial Food Equipment controller reads 'E1', it means that the sensor probe has failed and must be replaced. Further assistance may be needed.

Summary

Safety Warnings

General Safety Precautions

Emphasizes understanding the manual and using qualified technicians for service.

Cleaning Precautions

Warns against using abrasive pads and leaving drawers open for extended periods.

Installation and Setup

Introduction and Power

Describes the refrigerator's function and necessary electrical specifications for operation.

Uncrating and Inspection

Guides on inspecting the unit upon arrival and safely removing it from packaging.

Initial Preparation

Remove Packing Materials

Instructions for removing all internal packing and securing components.

Wash and Sanitize Interior

Details the process for cleaning and sanitizing the interior and drawer components.

Operating Instructions

Temperature Setting

Explains how to view and modify the refrigerator's temperature setpoint.

Operating Procedure

Outlines the steps for powering on the unit and managing condensate.

Loading and Cleaning

Loading and Restocking Guidelines

Provides rules for proper product loading and restocking to ensure efficient operation.

Exterior Cleaning

Details the correct procedures and approved chemicals for cleaning the unit's exterior.

Interior Cleaning

Details the correct procedures and approved chemicals for cleaning the unit's interior.

Preventative Maintenance

Condenser Coil Cleaning

Instructs on the quarterly cleaning of condenser coils for optimal performance.

Drawer Gasket Inspection

Guides on inspecting drawer gaskets for integrity and proper sealing.

Drawer Maintenance

Drawer Cleaning and Removal

Provides instructions for cleaning the drawer organizer and the drawer itself.

Drawer Roller Assembly Removal

Details the procedure for detaching and cleaning the drawer roller assemblies.

Drawer Reloading

Reloading Drawer Procedure

Explains the steps to correctly reinsert the drawer and its roller assembly.

Drawer Installation Video

Accessing Installation Video

Provides a QR code and URL to view an instructional video on drawer removal and installation.

Product Warranty

Warranty Coverage and Exclusions

Outlines the 2-year limited warranty, including coverage and specific exclusions.

Troubleshooting

Common Unit Issues

Addresses common operational problems like the unit not running or failing to reach temperature.

Controller Error Codes

Explains the meaning of controller error codes and corresponding troubleshooting steps.

Gasket Condition Reference

Offers visual examples of good and broken drawer gaskets for troubleshooting.

Assembly Drawing

Component Identification

Features an assembly diagram with a detailed bill of materials for unit components.

Wiring Diagram

Electrical Schematics

Presents the electrical wiring schematic for the refrigerator's components.

Technical Specifications

Refrigeration Specifications

Details the refrigerant type, operating pressures, and electrical data of the unit.

Replacement Parts List

Lists essential replacement parts with their corresponding H&K part numbers.

Controller Parameters

Parameter Definitions

Explains various controller parameters, their values, and descriptions for configuration.

H&K 87050.01P Specifications

General

Brand	H&K
Model	87050.01P
Category	Commercial Food Equipment
Language	English

Related product manuals

H&K 804800

13 pages

H&K 804048V