To Next PageTo Next PageWhat to do if connectors are loose on H&S AUTOSHOT Welding System?
Loose connectors can lead to overheating of cables and terminals, resulting in permanent damage. Ensure all welding cables are undamaged and that all terminal connections are secure on your H&S AUTOSHOT Welding System.
Why is the power lamp flickering on my H&S AUTOSHOT HSW-6213?
If the POWER lamp is flickering on your H&S AUTOSHOT Welding System, it indicates that the LINE voltage is either too high or too low. To resolve this, observe the LED display lamp and confirm that the POWER lamp is continuously illuminated.
How to remove rust from terminal lugs in H&S AUTOSHOT Welding System?
If the terminal lugs in your arc welding machine are rusty, remove the oxidation on the bolt using emery cloth or steel wool. This will ensure good electrical contact on your H&S AUTOSHOT Welding System.
What to do if terminal lugs are burnt in H&S AUTOSHOT HSW-6213 Welding System?
If the terminal lugs in your arc welding machine are burnt, please replace them on your H&S AUTOSHOT Welding System.
What to do if terminal lugs are loose in H&S AUTOSHOT HSW-6213 Welding System?
If the terminal lugs in your arc welding machine are loose, please secure them on your H&S AUTOSHOT Welding System.
How to fix non-functional voltage and wire speed knobs on H&S AUTOSHOT HSW-6213?
If the voltage 'V' and wire speed 'S' knobs are not functional and do not turn easily, replace the potentiometers on your H&S AUTOSHOT Welding System.
What to do if H&S AUTOSHOT Welding System has vibration or peculiar smell?
If you experience issues such as the cooling fan not working, unusual vibrations, or a peculiar smell, disconnect the power cord and remove the cover to check for any blockages. Remove any obstructions you find in your H&S AUTOSHOT Welding System.
What to do if the power switch does not snap in H&S AUTOSHOT HSW-6213?
If the power switch does not correctly snap into position, please replace it immediately. Contact the service department for a replacement switch for your H&S AUTOSHOT Welding System.
General| Brand | H&S AUTOSHOT |
|---|---|
| Model | HSW-6213 |
| Category | Welding System |
| Language | English |
