AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS
H&S
DEALER PRE-DELIVER
Y CHECK LIST
After the Manure Spreader has been completely set-up, check to be certain it is in correct running order before
delivering to the customer. The following is a list of points to inspect. Check off each item as you have made
the proper adjustments and found the item operating satisfactorily.
PTO shields turn freely.
All Shields and Guards are in place and fastened.
All grease fittings have been lubricated and gearbox filled to proper level –
See lubrication guide in this manual.
All mechanisms are operating trouble free.
All roller chains are at proper tension.
Apron chains are adjusted properly.
All bolts and fasteners are tight.
All decals are in place and legible.
(Remove Dealers File Copy At Perforation)
(Dealer’s Name) Model Number
(Signature of Pre-Delivery Inspector)
(Inspection Date)
Serial Number
DEALER DELIVERY CHECK LIST
This check list that follows is an important reminder of valuable information that should be passed on to the
customer at the time this Manure Spreader is delivered.
Check off each item as you explain it to the customer.
This pre-delivery check list, when properly filled out and signed assures the customer that the pre-delivery
service was satisfactorily performed.
Explain to the customer that the pre-delivery inspection was made.
Explain to the customer all the safety precautions they must exercise when operating this unit.
Explain recommended loads for different types of materials.
Explain to customer that regular lubrication is required for proper operation and long life of
machine. Show customer the lubrication section of Owner’s Manual.
Give the customer Owner’s Manual and make sure he reads and understands all operating and
service instructions.
Record Serial Number on Page 16 of this Manual.
Have customer sign a completed “Warranty Registration,’’ and mail it promptly.
Date Delivered ________________________ Dealer’s Name ______________________________
By ________________________________________
Note: Warranty is not valid until warranty card is completed and returned to H&S Mfg. Co., Inc.
-3-
Signature of Original Buyer
To Next Page
Loading...
