SPREADING - WITH OPTIONAL HYDRAULIC DRIVE
1. Engage tractor PTO shaft slowly. Beater is always in the engaged position, therefore, engaging
tractor PTO will automatically start beater.
2. Raise the hydraulic tailgate.
3. Open hydraulic valve on tractor connected to speed control valve on Manure Spreader.
4. Control speed of apron by turning speed control handle clockwise to increase speed,
counter-clockwise to decrease speed.
5. When the Manure Spreader is almost empty, the bed can be cleaned out by disengaging tractor
PTO (which will stop beater), and increasing apron speed by turning control handle clockwise,
thus saving unnecessary driving time.
OPERATION
FAILURE TO FOLLOW THE RECOMMENDED ADJUSTMENTS WILL VOID WARRANTY
-16-
To Next Page
Loading...
