7
in case faulty pieces cannot be returned to
the Manufacturer within 30 days, from date
of receiving the new ones and with the
methods described in the previous point, the
Manufacturer reserves the right to sending
an invoice for the new delivered pieces.
The warranty is not recognised:
during transport as the windrow rotary rake
travels under Customer responsibility;
when faults derive from improper or incorrect
use of the windrow rotary rake or operator
negligence;
when faults are caused by normal wear,
even with the windrow rotary rake not
working;
in case of late signalling of the
manufacturing defects;
in case of accidents or fortuitous cases of
force majeure.
The warranty becomes void in case:
the windrow rotary rake is used by non-
appropriately trained personnel;
the indications and/or regulations in these
instructions have not been followed or
complied with;
the envisioned maintenance interventions
have not been carried out;
the Customer makes modifications to the
windrow rotary rake without the written
authorisation of the Manufacturer or tampers
with the components;
non-original spare parts are used or non-
conform to those recommended by the
Manufacturer.
However, the warranty period recognised for the
windrow rotary rake is not valid for all
components that are not produced by the
Manufacturer and for which that reported in the
relative purchase notes remains valid.
IMPORTANT
The Manufacturer does not guarantee conformity
of the windrow rotary rake with the legal
dispositions in force and, in particular, with those
relating to accident-prevention and pollution in
the non-E.U. Countries. The adaptation of the
windrow rotary rake to the respective regulations
will be the full responsibility and at the expense
of the Customer. The Manufacturer is relieved
from every responsibility, if the inobservance of
these regulations raises controversies or causes
any damage.
To Next Page
Loading...
