6
MOUNTED TYPE PULL-TYPE
A4 Warranty
H&S (called Manufacturer) guarantees every
component of the windrow rotary rake is without
defects, as they are tested before delivering the
machine to the Customer. The warranty has a 1
year validity starting from the date indicated
on the tax delivery document, except
different agreements underwritten with the
Customer.
However, upon receipt of the windrow rotary
rake, they must verify that it is intact and
complete in its every part. Any claims must reach
the Manufacturer in writing within 8 days from
receipt of the equipment.
H&S commits to replace the components that,
for manufacturing or material defects, cause a
fault in the operation at its establishment, within
the warranty period and free of charge. Should it
not be possible such replacement at its own
premises, the Manufacturer commits to sending
the faulty pieces at the Customer's premises.
With regard to these replacements, H&S does
not waiver the warranty period during the time
which the windrow rotary rake remains still, or
recognises any damage or indemnity to the
Customer, for direct and indirect expenses or
damages. Should the intervention of our
technician be required, the relative labour, travel
and overnight expenses will be fully charged to
the Customer. Only the Manufacturer or its
technicians can ascertain the fault.
However, it must be taken into consideration
that:
the faulty pieces remain the property of the
Manufacturer;
should replacement be carried out at the
Customer's establishment, the faulty pieces
must be returned and, therefore, sent to the
Manufacturer, for subjecting to technical
review, integrates without tampering, without
tampering and carriage paid;
Working width with windrow
Tractor speed in working phase
Cardan shaft + torque limiter
Tires - Ballon 18”- 8.50”x8”
To Next Page
