Hangar 9 Piper Pawnee 40 ARF - User Manual

www.modellmarkt24.ch
Wingspan ........................................80 in (2032mm)
Wing Area ..........................942 sq in (60.77 sq dm)
Length .......................................55.8 in (1417.3mm)
Weight .......................................... 8–9 lb (3.6–4 kg)
ASSEMBLY MANUAL
Piper Pawnee 40 ARF
Engine ..................................... .56–.82 Four-Stroke
....................................... .40–.52 Two-Stroke
...........................................Power 46 Electric
Radio..............5-Channel w/7 Servos (6 for electric)
Specifications
www.modellmarkt24.ch

Summary

Introduction and Preparations

Radio and Power Systems Requirements

Recommended Engine and Field Equipment

Warranty and Safety Precautions

Details product warranty, limitations, and critical safety guidelines.

Questions, Assistance, and Repairs

Section 1: Landing Gear and Rudder Installation

Section 2: Aileron and Flap Servo Installation

Section 3: Wing Attachment

Section 4: Stabilizer;Elevator Installation

Section 5: Radio Installation

Required Parts and Tools

Engine Installation

2-Stroke Engine Installation

Step-by-step guide for installing a 2-stroke engine.

4-Stroke Engine Installation

Step-by-step guide for installing a 4-stroke engine.

Throttle Servo Installation

Motor and Cowling Installation

Electric Motor Installation

Steps for installing the electric motor and related components.

Cowling and Canopy Installation

Flight Preparation and Safety

Recommended Center of Gravity (CG)

Guidance on setting the correct center of gravity for optimal flight balance.

Control Throws

Pre-Flight and Operation Checks

Hangar 9 Piper Pawnee 40 ARF Specifications

General

Skill Level	Intermediate
Construction	Balsa and plywood
Covering	UltraCote
Engine Size	.40 - .46 cu in (2-stroke) or .52-.65 cu in (4-stroke)
Radio System	4-channel
Servos	4 standard servos