WARNING
Untempered technology licence of our company, any refit at safety and capability to
attachment is strict prohibit.
Fact rating load capacity should be the least of rating load capacity, the load capacity
of attachment, colligate load capacity of truck. Generally speaking, the colligate load
capacity of truck is the least. Attachment load capacity just a count value of
attachment pressure.
Assy go to in reason, credibility, safety to avoid the attachment glide around carriage
in using.
After hang attachment, embed the rise catch block to the gap of top beam, let the
offset of centre line of attachment and carriage is less than 50mm.Otherwise,it will be
affect the landscape orientation stability of forklift.
To these attachment with rotating function, such as paper roll clamp, bale clamp,
muti-purpose clamp, drum clamp, it needs to weld chock block in the joint of
carriage beam and attachment to prevent move from side to side in the operation.
Assy the attachment of below catch orientation, it need to adjust the clearance
between below catch and beam of carriage.
To Next Page
Loading...