Need help?Do you have a question about the HANGCHA CPD25-XD4-SI26 and is the answer not in the manual?
General| Load Capacity | 2500 kg |
|---|---|
| Load Center Distance | 500 mm |
| Lift Height | 3000 mm |
| Max. Gradeability (unladen) | 20 % |
| Gradeability (no load) | 20% |
| Battery Voltage | 48 V |
| Power Type | Electric |
| Rear Tread | 980 mm |
| Rated Load | 2500 kg |
| Lifting height | 3000 mm |
| Lifting Speed (laden) | 0.48 m/s |
| Lift Speed (full load) | 0.48 m/s |
| Lowering Speed (unladen) | 0.5 m/s |
| Lowering Speed (no load) | 0.5 m/s |
| Noise Level | 72 dB |
| Travel Speed (laden) | 13 km/h |
| Travel Speed (unladen) | 14 km/h |
| Travel Speed (full load) | 13 km/h |
| Travel Speed (no load) | 14 km/h |
| Lifting Speed (unladen) | 0.56 m/s |
| Lift Speed (no load) | 0.56 m/s |
| Lowering Speed (laden) | 0.45 m/s |
| Lowering Speed (full load) | 0.45 m/s |
Lists key technical data and specifications for various models.
Outlines operator qualifications, PPE, basic rules, and inspection.
Details rules for driving, load handling, attachments, and visibility.
Covers safe stacking, unstacking, and load security.
Rules for safe handling, charging, and regulations for lithium batteries.
Routine checks and step-by-step charging guide for lithium batteries.
Critical safety guidelines and procedures for installing lithium batteries.
Guidance for initial operation and essential pre-operation checks.
Instructions for operating the forklift, including driving and stopping.
To Next Page