Hanna Instruments BL 7916 User Manual

14
Hose Connections
• Cut a long enough section of the
hose to reach the suction valve of
the pump head from the feed tank.
Allow some slack in the hose and be
sure it is not kinked or twisted.
• Slip a hose connector onto the hose
over the head valve and up to the
bottom of the threads ensuring it is
fully seated.
• Slide the connector up to the threads
and tighten to form a seal.
• Slip the ceramic weight (HI721008)
and a connector over the other end of
the hose.
• Attach the foot valve assembly
(HI721005) to the hose and slide the
connector up to the threads and tighten
to form a seal.

Hanna Instruments BL 7916 Specifications

General

Brand	Hanna Instruments
Model	BL 7916
Category	Measuring Instruments
Language	English