Hanna Instruments BL 7916 User Manual

17
Downhill Installation
Suggested installation when pumping from one container to another,
each at different levels and with only nominal pressure.
START-UP
At start-up, purge all chemical gases and air from the suction tubing,
valves and pump head. Start the pump.
When all the air or gas is vented, the solution being metered will
appear in the output line.
Note: only when operating under pressure, the pump must be started
unloaded.

Hanna Instruments BL 7916 Specifications

General

Brand	Hanna Instruments
Model	BL 7916
Category	Measuring Instruments
Language	English