Hanna Instruments Gro Line HI9814 User Manual

14
Replace the battery cover making sure that the gasket is
in place.
Replace the three 1.5V AAA alkaline batteries located in
the battery compartment, observing the indicated polarity.
BATTERY REPLACEMENT
When the remaining battery life is less
than 10% the battery tag blinks on the
display to warn the user.
Battery Error Prevention System (BEPS)
If the battery is too weak (“0%”) the display shows
“bAtt“, “DEAD“ for few seconds then the meter power off.
Immediately replace the batteries with new ones.
The batteries are accessed by opening the battery cover
on the back of the instrument. Remove protective boot
if present.
BATTERY REPLACEMENT

Hanna Instruments Gro Line HI9814 Specifications

General

Brand	Hanna Instruments
Model	Gro Line HI9814
Category	Measuring Instruments
Language	English