Need help?Do you have a question about the Hanna Instruments GroLine HI9814 and is the answer not in the manual?
General| Model | HI9814 |
|---|---|
| Category | Measuring Instruments |
| Manufacturer | Hanna Instruments |
| Product Line | GroLine |
| pH Range | 0.00 to 14.00 pH |
| pH Resolution | 0.01 pH |
| EC Range | 0.00 to 20.00 mS/cm |
| EC Resolution | 0.01 mS/cm |
| TDS Resolution | 1 ppm |
| TDS Accuracy | ±2% F.S. |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.5 °C |
| IP Rating | IP67 |
| Type | pH/EC/TDS Meter |
| Calibration | Automatic, 1 or 2 points |
| Battery Type | 1.5V AAA (4) |
Lists all items included with the meter, such as probes and solutions.
Describes the meter's durability, portability, and IP67 rating for rugged use.
Details the function of each numbered segment on the meter's LCD screen.
Instructions on how to attach the HI1285-7 probe to the meter.
Steps to power on the meter, including battery check.
Configures the display unit for temperature (°C or °F).
Sets the time delay before the meter automatically powers off.
Chooses between standard (STD) or quick (QUICK) calibration.
Selects the factor for converting conductivity to TDS (0.50 or 0.70).
Procedure for calibrating the pH measurement using standard or quick methods.
Steps for calibrating with a single buffer solution.
Procedure for calibrating using two different buffer solutions.
Procedure for calibrating the EC measurement using standard solutions.
Instructions for cleaning, soaking, and storing the electrode.
Detailed steps for cleaning the electrode using specific solutions.
Guidance for resolving common issues with the meter and electrode.
Advice on suitable applications and environmental considerations for meter use.
Details on the product warranty period and conditions for repair or replacement.
To Next Page