Hanna Instruments pHep+ HI 98108 User Manual (English)

To Next Page

pHep

HI 98108

Pocket-sized pH Meter

with ATC

IST98108 R3 05/05

pHep

+ is a rugged pH tester with replace-

able electrode and renewable reference junction.

The instrument can be calibrated at two points

by the user, simply acting on the offset and slope

calibration trimmers. In addition, the Automatic

Temperature Compensation feature enhables high

accuracy in measurements.

pHep

+ is in compliance with the CE direc-

tives.

SPECIFICATIONS

Range 0.0 to 14.0 pH

Resolution 0.1 pH

Accuracy (@20°C/68°F) ±0.1 pH

Typical EMC Deviation ±0.1 pH

Calibration Manual, 2 point, through

offset and slope trimmers

Temperature Compensation

Automatic, 0 to 50°C

Environment 0 to 50°C (32 to 122°F);

RH max 95%

Battery Type 4 x 1.5V alkaline

Battery Life approx. 200 hours of use

Dimensions 175 x 41 x 23 mm

(6.9 x 1.6 x 0.9")

Weight 95 g (3.4 oz.)

ACCESSORIES

HI 73108 Spare electrode

HI 7004M pH 4.01 solution, 230 mL bottle

HI 7007M pH 7.01 solution, 230 mL bottle

HI 7010M pH 10.01 solution, 230 mL

HI 70300M Storage solution, 230 mL bottle

HI 7061M Cleaning solution, 230 mL bottle

HI 731326 Calibration screwdriver (20 pcs)

pHep is a registered Trademark of

Hanna Instruments

www.hannainst.com

Need help?

Do you have a question about the Hanna Instruments pHep+ HI 98108 and is the answer not in the manual?

Hanna Instruments pHep+ HI 98108 Specifications

General

pH Range	0.0 to 14.0 pH
Resolution	0.1 pH
Accuracy	±0.2 pH
Temperature Compensation	automatic, 0 to 50°C (32 to 122°F)
IP Rating	IP67
Calibration	Automatic, 1 or 2 point
Calibration Buffers	pH 4.01, 7.01, 10.01
Electrode Type	Glass electrode with a built-in temperature sensor
Battery Type	4 x 1.5V (AAA)
Battery Life	Approximately 1000 hours of continuous use
Environment	0 to 50°C (32 to 122°F)